New Products

Di700A Nomenclature & Specfication

Di700A Introduction

Nomenclature

Di700a_namee_r

Specifications

Type : for Canon/ Nikon and Sony Digital SLR cameras
Guide no. (at ISO 100 in M) : GN54 (at 200mm zoom head position)
GN48 (at 105mm zoom head position)
GN28 (at 35mm zoom head position)
Focal length coverage : 24 - 200mm (16mm when using build-in wide panel)
Power Source : Four size-AA Alkaline, 1.2V NiMH batteries
Battery loading system : Quick loading – Battery Magazine (BM-02) (*1)
Recycling Time : 0.1 - 4 Sec
Number of flashes (Approx.) : 200 - 1500 flashes
Flash duration : 1/800 - 1/30,000 Sec
Color Temperature : 5,600K
Exposure control : E-TTL II / E-TTL (Canon), i-TTL (Nikon) and ADI/P-TTL (Sony)
Wireless Mode : 2.4GHz Wireless TTL Slave: radio transmission (NAS specifications)
Optical Wireless TTL Slave (only correspond to the same brand of camera systems) (*2)
Optical slave mode (*3) (SD / SF mode)
EV compensation on flash : -2 to +2 EV in increments of 1/2 EV
Bounce position : Up: 90°, Down: 7°, Left: 180°, Right 180° (with flash head tilting / rotating lock release button)
Flash exposure control : 1st- Curtain synchronization, 2nd- Curtain synchronization, Highspeed synchronization, Red-eye reduction, Slow synchronization (only available on Nikon Model), FE / FV Lock (set on camera)
AF-assist beam effective range : 0.7 – 6m/ 2.3 – 19.7 feet
Operation panel : LED Color panel, select dial
External service ports : External power source socket, standard and 3.5mm PC sync terminal
Radio specifications : 2.4GHz ISM band (Obtaining technical standards conformity certification)
Channel : 8 channels (Channel setting in Air 1)
External Power Pack : Support Nissin PS 8 & PS300 External Power Pack (Optional Accessories)
Accessories : Soft case, flash stand (with screw)
Dimensions : 140(H) x 75(W) x 115(D) mm/ 5.5 (H) x 3(W) x 4.5(D) inches
Weight : 380g/ 13.4oz (without batteries)

Notice: Design and specification are subject to change without prior notice.

*1: Not compatible with Nissin Battery Magazine BM-01
*2: Not correspond to the wireless optical TTL master. Can be set as A/B/C group (Group RMT/ RMT 2/ RMT M for Sony Version)
*3: SD - Slave Digital (synchronizes to the pre-flash system. The master flash is to be set at TTL (E-TTL for Canon, i-TTL for Nikon and ADI/P-TTL for Sony) mode
SF - Slave Film. synchronizes to the traditional single flash system. The master flash is to be set at manual mode. Studio lighting system synchronizes to this mode. This mode is also available for open flash, and for a standard flash in the market.

Di700A Introduction