Air10s

The New Standard – Nissin Air10s

An advance 2.4Ghz wireless TTL strobe commander

Nissin Japan Limited (Chairman Mr. Goto Chikara) proudly announces the Air10s, an advance

NAS (Nissin Air System) 2.4Ghz Wireless TTL commander for Fujifilm, Sony, Micro Four Thirds, Canon and Nikon cameras, available in April 2017.

The Air10s is an advanced strobe commander in the N.A.S., Nissin Air System*1. The simple and clear dial layout with Color LCD display allows the user to seamlessly and quickly control a large group of strobes from a dark indoor studio, to a bright outdoor environment. It can control the NAS Ready strobes (i60A and Di700A) and the receiver Air R wirelessly.

Sustainable performance – easily updated via a Micro SD card slot

The Air10s has been equipped with a Micro SD card slot that allows users to update the device easily by themselves. Nissin plans on putting a Micro SD card slot on all future strobes and commanders.

Expand the creativity boundary – Control your strobes up to 100 meters*2

The device’s range of use has been greatly extended (when compared to older models) to a maximum distance of 100 meters, and the TTL Mode, high speed sync (FP sync) supporting up to 1/8000 Highspeed shutter speed, rear curtain, and other functionalities can be controlled remotely.

Finest adjustment – supporting 1/3EV step in TTL flash exposure correction, and the smallest output down to 1/256*3

Used under the TTL mode, minimal adjustments are possible with just 1/3EV step. In addition, under manual mode, the device supports the lowest power adjustment down to 1/256, which comes in handy for highly sensitivity shoots.

Instant strobes setup – Manual output power instantly transform from TTL exposure data

The device has a “TTL Memory Function”, which memorizes the exposure during a TTL Mode shoot, and allows for a one-touch switch to manual mode. You can save time during the strobes setup as the device takes the TTL exposure data, calculates the individual output internally, and transforms the exposure data into manual mode for advance adjustment.

Set your group of strobes free – The Open Mode*4 allowing multiple Air10s

to pair with the same group of strobes

The “open mode” allows for multiple Air10s units to pair with the same group of strobes. This means, the need to re-pair devices is eliminated, and even if cameras are changed, the same settings can be used as the shoot continues. This convenient functionality allows multiple cameras and commanders to share a same group of NAS strobes.

Crossover control – Full Control of Different versions of NAS Strobes

Even if your Air 10s is for Sony Mount, it is possible to pair it with Canon, Nikon and other differing version of NAS strobes (i60A, Di700A), and you can retain use of all the functions, including TTL Mode (Applies to the other type of Air10s versions as well).

*1 NAS stands for Nissin Air System, a proprietary wireless TTL communication system developed by Nissin for 2.4GHz radio transmission that allows for stable operation of slave strobes in outdoor or environments that may have other disturbances. Devices are paired beforehand to ensure stable communication with each other, and to avoid signals from getting mixed up, 8 channels have been set up, providing a secure communication environment.

*2 For Canon Mount devices that are set to Mode II, the rear curtain sync function cannot be used.

*3 Only supported on i60A. When the device is paired with Di700Aor Air R, the TTL is -2.0~2.0EV, 1/2EV step, in Manual it is 1/1-1/128, 1EV step.*4 When using in Open Mode, the NAS strobe’s firmware needs to be updated.

Download PDF