New Products

MG10 Professional Wireless Handgrip Flash

Mg10_poster_en

Ultimate Power
An advance NAS 2.4Ghz Wireless strobe for on-camera and studio shoot

Kit Set with Canon, Nikon and Sony version Air 10s are available now.
Fujifilm and Micro Four Thirds system version kit set are coming soon.

If the first 4 product's serial numbers digits of Air 10s smaller-than the following value : 87000000000~ , it will be supporting to MG10 after Air 10s firmware updated. Please click here for firmware update of Air10s.


Please check here for the stock availability with your local distributor



NAS (Nissin Air System)

NAS is Nissin newly developed 2.4GHz radio transmission wireless flash system, obtains FCC and other international technical standards certification. To compare with the traditional optical wireless transmitters, 2.4GHz radio transmission is less susceptible to angle and obstacle limitation, Air 10s signal coverage up to 100 meters. Transmission channels and radio transmission IDs can be set to prevent misfiring in the event of signal interference on the same channel. Nissin Commander Air 10s can control 4 groups of Nissin Flash Di700A , i60A or Nissin Receiver Air R with the user friendly operation panel and variety function, it would be more convenient for the user. 



MG10 Commander Features Highlight

■ GN80 / 165Ws Ultimate Power Output
■ 1.5 seconds Recycling time 
■ Removable external motorized zoom
■ High power modelling light
■ NAS 2.4 GHz ISM band (to obtain technical standards certification)
■ 100 meters transmission distance (* 1)
New 8 Groups control (* 2)
■ Radio transmission IDs Technology
New Advanced groups control (* 2)
New Open mode (* 2)
■ Supports TTL, M, 1st curtain / 2st curtain sync, HSS high-speed sync (up to 1/8000 sec.), Slow shutter sync, red-eye reduction(* 3)
New 1/3 EV step intervals compensation and 1/256 low power light output control
New TTL memory function
New Remote flash head auto zoom function
New Modeling light on remote flash control (* 2)
New Update firmware via Micro SD/SDHC card
New Remote camera shutter release  (* 2)
■ Including protection case, AA battery magazine , Li-ion battery magazine, ball head, filter holder and wide-angle diffuser.

(* 1) This is a test result record, it may be affected by equipment and environmental factors.
(* 2) This is a new feature which supports Air10s commander only.
(* 3) Those functions depend upon the camera model, available in compatible cameras only.

Click here to check the Specifications  

Patented design – magnetically contacted motorized zoom head 

The removable external motorized zoom allows MG10 to zoom 24 ~ 200mm and 18mm with diffuser. It can also control in manual and auto synchronize lens focal length via Air 10s.

Fast recycling time with full power

When two Li-ion batteries with PS 8, type 26650, the recycling time is only 1.5 seconds 
With two Li-ion batteries the recycle time is approximately 2.8 seconds.
(500 flashes with two 5000mAh Li-ion batteries or higher).
With eight AA batteries the recycle time is approximately 3.5 seconds.

High power modelling light (LED)

The powerful modelling light without zoom head which is perfect match for applying to the studio usage.

Set your group of strobes free – The Open Mode allowing multiple Air10s pair to the same group of strobes

The “open mode” allows for multiple Air10s units to pair the same group of the MG10 strobes which means the need to re-pair devices is eliminated. Even if cameras are changed, the same settings can be used as the shoot continues. This convenient functionality allows multiple cameras and commanders to share a same group of NAS strobes(MG10).

Independent control of maximum 8 groups

MG10 supports the basic and advance groups in maximum 8 groups via Air 10s. The basic group which is independently control the exposure setting in TTL or M mode. The advance group which is control both TTL and M mode in the mixing setting.

Sustainable performance – easily updated via a Micro SD card slot

The MG10 equipped with a Micro SD card slot that allows user to update the device easily by themselves. Nissin plans on putting a Micro SD card slot on all future strobes and commanders.

*1 NAS stands for Nissin Air System, a proprietary optical wireless TTL communication system developed by Nissin for 2.4GHz radio transmission that allows for stable operation of slave strobes in outdoor or environments that may have other disturbances. Devices are paired beforehand to ensure stable communication with each other., and to avoid signals from getting mixed up, 8 channels have been set up, providing a secure communication environment. *2 For Canon Mount devices that are set to Mode II, the rear curtain sync function cannot be used. *3 There are no batteries included.

Design and Specifications are subject to change without prior notice.

Previous page : MG10 Specifications

Next page : MG10 Firmware update