Entry to Professional

When shooting indoors or in low light environment, it is a big challenge for cameras. Indeed, there are many ways to create an amazing picture, one of them is lighting control. Photographers always goal for an advanced level after experiencing certain types of lighting equipment.




Notice: Design and specification are subject to change without prior notice.

(* 1):The weight calculation is not included Battery
(* 2):The maximum synchronization speed depends upon the camera model
(* 3):Only applicable to wireless Slave mode. Compatibility based on the system of original factory camera and flash model.
(* 4):SD - Slave Digital (synchronizes to the pre-flash system. The master flash is to be set at TTL (E-TTL for Canon, i-TTL for Nikon and ADI/P-TTL for Sony) mode.
SF - Slave Film. synchronizes to the traditional single flash system. The master flash is to be set on manual mode. Studio lighting system synchronizes to this mode. This mode is also available for open flash, and for a standard flash in the market.


i600 Firmware update

How to check the Firmware version of i600:

  1. Turn on the flash.

  2. Pressing the Pilot button and Power button at the same time for a second.

  3. The indicator lamp A and C will twinkle until taking off batteries, the twinkling times means firmware version. For example: 
    Indicator lamp A twinkling 1 times, Indicator lamp C twinkling 1 time, i600 version is 1-1.

  • The firmware update is not required if the version is the latest.

The latest firmware version

1-1 for Canon

1-2 for Nikon

1-3 for Sony

1-3 for Fujifilm

1-2 for Four Thirds

Firmware update

Please contact our official distributors for firmware update service because of i600 using a special update interface (not USB).